Products
Showing 1–16 of 36 results
-
(N)3GHSSHCH LSZH Tunnelling & Underground Mining Cable
Application: (N)3GHSSHCH features a low-smoke zero halogen (LSZH) inner and outer sheath for use in environments where there is a potential fire hazard. The cable is designed to withstand the stresses of underground and mining environments, including chemical and climatic…
-
(N)3GHSSYCY Cable for Tunnel and Underground Mining
The Rated 3.6/6kV–12/20kV (N)3GHSSYCY Rubber Cable as feeder cable for power supply of shiftable MV equipment, e.g. compressure resistant transformers, for underground mining applications as well as for tunnel sites. N3GHSSYCY cable Working Temperature: operate in ambient temperatures of -40°C…
-
(N)TMCGCW11Y Cable | Medium Voltage Flexible Reeling Cable
(N)TMCGCW11Y Cable is a high-flexible medium-voltage screened single-core cable for crane reeling, shore power, energy chains and heavy-duty mobile equipment, based on DIN VDE 0250-813.
-
(N)TMCGETMPU vs RIT-(N)TMCGETMPU Portable Trailing Cable
(N)TMCGETMPU and RIT-(N)TMCGETMPU portable mining cables both comply with VDE 0250 Part 813 and IEC 60502 standards, supporting voltage classes from 3.6/6 kV up to 18/30 kV, and Both cables use similar electrical insulation systems; however, RIT-(N)TMCGETMPU incorporates an enhanced…
-
(N)TSCGEWÖU Submersible & ABT & FO(LWL) Drilling Tunneling Mining Trailing Cable
(N)TSCGEWÖU Cable for fixed energy distribution in mines. (N)TSCGEWÖU FO Cable for high and extreme mechanical stresses, including torsional stress, deflection into different planes. (N)TSCGEWÖU ATB Cable for heavy mobile equipment such as drag lines, shovels, dredges, drills, under extreme…
-
0.6/1kV Flat S1BNH2-F Submersible Pump Rubber Cable 4G16mm
Falt S1BNH2-F Cable is a tough rubber unscreened 0.6/1kV cable for installation inside or outside in dry, damp or wet environments and in hazardous environments (subject to local regulations). It can be immersed in fresh and salt water to a…
-
0.6/1kV NSSHCGEÖU(V) Mining Cable 3×70, 3×95, 3×120, 3×150
NSSHCGEÖU(V) is a heavy-duty flexible mining cable complying with DIN VDE 0250 Part 812, rated at 0.6 It is specially designed for coal cutters, featuring EPR insulation, chloroprene outer sheath, integrated pilot cores and concentric earthing armour. It adapts to…
-
1kV NSHTOEU Scoops LHDs Underground Mining Reeling Cable
TEBAOFLEX 1kV NSHTOEU Mining Rubber Cable for frequently changing dynamic loads, such as reeling cables for scoops (LHDs) in underground mines, suitable for mono-spiral reels and cylindrical reels. 1kV NSHTOEU scoops (LHDs) Mining Rubber Cable Feature： Resistant to: oil, ozone,…
-
2000V 4 0 535 DLO Diesel Locomotive Cable 90°C EPR-CPE RHH RHW-2 for Mining
DLO Cable Mainly Applicaton: Railroad and mass transit car wiring General building wire RHH/RHW-2 Deep well submersible pump cable Mining operations Wind turbines Battery power cable Control panel power distribution Heavy-duty flexible power cables Portable or fixed installations Leads for…
-
2000V Round Type G GC 3/C EPR CPE Rubber Cable for Mining Track Equipment
Type G-GC is a 2kv heavy‑duty portable trailing cable for underground coal mines,with 3 power cores + 2 ground conductors + 1 ground‑check conductor. Type G GC Cable is specially suitable for use with mobile mining equipment such as continuous miners,…
-
3.6-30kV R-(N)TSCGEWÖU Vs F-(N)TSCGEWÖU Reeling Cable
R-(N)TSCGEWÖU is a medium-voltage reeling cable designed for continuous winding, unwinding, tensile loading and torsional stress on mobile mining equipment, while F-(N)TSCGEWÖU is a medium-voltage semi-flexible installation cable intended for fixed or occasionally movable power distribution systems. The reeling version…
-
5kV 8kV 15kV Type MP-GC 3/C XLPE/PVC or EPR/CPE Mining Power Feeder Cable
Type MP-GC Mining Power Cable Construction and Feature Designed for heavy-duty underground mining applications Insulation is Ethylene Propylene Rubber (EPR) or Cross Linked Polyethylene (XLPE) 100% Insulation level,90°C 3 conductor phase core +2 conductor ground check core with insulation. Robust…
-
6-30kV NTMCGCWOEU (N)TMCGCWOEU EPR Heavy-Duty Rubber Cable
In terms of usage NTMCGCWOEU and (N)TMCGCWOEU: NTMCGCWOEU is the top choice for heavy-duty mobile machinery, mining equipment and outdoor facilities facing frequent movement and harsh conditions. (N)TMCGCWOEU is suitable for standard industrial wiring, stationary equipment and light mobile devices…
-
6~20 kV 1Core RHEYFIRM (SI) NTMCGCWOEUS Cable 1×95/16 Manufacturer
6/10 kV 12/20 kV (SI) NTMCGCWOEUS Cable 1×95/16 is flexible high voltage cable for used normally in short lengths, as a reliable power connection for various mobile heavy machinery, mining gear and construction equipment. It is the preferred choice for…
-
600V 2PNCT-SB-3C-T-B PNCT Cable for Crane Reeling & Festoon
The PNCT Cable (is also called 3pnct or 2pnct Cable) is a type low voltage rubber cable, mainly used for reeling, festoon, basket operation of port crane and handling mobile equipment, the cable types including: 600v 2pnct sb, 600v 2pnct-b,…
-
600V CUR-2PNCT-3PNCT CUR-2PNCT-3PNCT-SB Cable for port crane festoon
CUR PNCT Cable for Cable Carrier / Festoon Trolley System, specially optimized for horizontal reciprocating festoon running, anti-sag & anti-torsion design CUR 2PNCT SB Cable: Class 2 EPR insulated chloroprene rubber cabtyre flexible cable, standard grade for light & medium-duty festoon…