Submersible Pump Cable
Submersible Pump Cable Selection GuideSpecify the pump cable around motor duty, water type, depth and installation method. Flat or round geometry, support and retrieval loads can be as important as voltage.Provide pump model, motor voltage/current, length, normal and maximum depth and starting method.State fresh, salt, polluted, process or drinking-water duty, temperature and chemical exposure.Confirm pressure, abrasion, suspension, clamps, bend points, termination and required water-contact evidence.Depth or water suitability is model-specific and must be documented. Send the RFQ with the pump and installation data.
Showing all 3 results
-
0.6/1kV Flat S1BNH2-F Submersible Pump Rubber Cable 4G16mm
Falt S1BNH2-F Cable is a tough rubber unscreened 0.6/1kV cable for installation inside or outside in dry, damp or wet environments and in hazardous environments (subject to local regulations). It can be immersed in fresh and salt water to a…
-
Drinking Water Drincable 600 and 800 Cable for 600m 800m Depth
Drinking Water Drincable 600 Cable used for standard submersible pumps for drinking water, installation at depths up to 600 meters, It is rated AD8 for water resistance and designed for permanent submersible. use in deep wells. Drinking Water Drincable 800…
-
ELCOSUB (N)TMH3S P2 0.6kV/2kv BS Submersible Pump Cable
TEBAOFLEX ELCOSUB (N)TMH3S submersible cables are intended for connection of electrical equipment in water, e.g. submersible pumps, lowering of water level and booster plants. The ELCOSUB (N)TMH3S cable also suitable for use in drinking water, cooling water, surface water, rainwater.…
Submersible Pump Cable Selection GuideSpecify the pump cable around motor duty, water type, depth and installation method. Flat or round geometry, support and retrieval loads can be as important as voltage.Provide pump model, motor voltage/current, length, normal and maximum depth and starting method.State fresh, salt, polluted, process or drinking-water duty, temperature and chemical exposure.Confirm pressure, abrasion, suspension, clamps, bend points, termination and required water-contact evidence.Depth or water suitability is model-specific and must be documented. Send the RFQ with the pump and installation data.